Inflatable Amusement Products General Installation And Usage Instructions

Inflatable Slide Installation and Usage Guide

### Step 1: Check the Package and Prepare Accessories

First, inspect the PVC storage bag and make sure there is no visible damage.
Open the package and take out the inflatable slide.
Prepare all included accessories such as the air blower, fixing ropes, and other parts.

### Step 2: Prepare the Installation Area

Choose a clean and flat surface, and place protective ground mats if necessary.
Make sure the area is free from sharp objects, corrosive liquids, or debris.
Unfold the inflatable slide completely and leave enough surrounding space for operation and safe use.
Ensure that the blower air inlet is not blocked.

### Step 3: Connect the Blower and Start Inflation

As shown in the video, securely attach the air blower tube to the blower outlet.
Use the supplied ropes or straps to fasten it tightly.
Connect the power supply and switch on the blower to begin inflation.

Before inflation, check that all air release zippers are fully closed and that any spare air inlets are tightly sealed.
This helps prevent unnecessary air leakage during operation.

(Inflation time may vary depending on the product size.)
For the inflatable slide shown in this video, the inflation process takes approximately 2–3 minutes.
The video footage has been sped up for demonstration purposes.

During inflation, you may slightly adjust the slide’s position and angle.
Once the slide is fully expanded, properly shaped, and the surface quickly rebounds when pressed, the inflation process is complete.

### Step 4: Secure the Product

After inflation, attach the fixing ropes to the anchor rings around the slide.
Secure the other ends to ground stakes or sandbags to keep the product stable during use.

Once properly secured, the inflatable slide is ready for use.

### Important Notice

Inflatable slides are continuous-air products.
The blower must remain powered on during use to maintain proper inflation.

Please follow local safety regulations at all times and ensure adult supervision throughout operation.

### Step 5: Deflation

After use, turn off the blower power.
The slide will begin to deflate naturally.

Open the spare air inlet and unzip the air release zippers around the slide to speed up the deflation process.

### Step 6: Folding and Storage

After the product is fully deflated and laid flat, fold one side toward the center, then fold the other side to the same width.
Keep the product as flat and neat as possible.

Starting from one end, slowly roll the slide into a compact cylindrical shape.
Use the provided packing straps to secure it firmly.

### Step 7: Packing and Transportation

Place the folded slide back into the PVC storage bag and fasten the bag securely.
Turn the bag upright and use the built-in handles for convenient transportation.

### Conclusion

This is the complete process for installing, using, deflating, and storing an inflatable slide.

If you need more detailed operating instructions or maintenance recommendations, please feel free to contact us anytime.